Pumpkin Carving

I am artistically challenge, in that I can't draw much more than a stick figure. Seriously. So when it came to carving pumpkins, I aways just opted for an easy toothy grin, because I just couldn't come up with any better ideas that I could draw out and execute. One of my best friends invited me over for pumpkin carving, and I was struggling with an idea, until I realized I could break out my silhouette and make a stencil!

Have I mentioned before just how much I love this machine? It has made craft projects so much more enjoyabe for me, and has greatly improved my crafting skillz. I have not been at a loss for projects since purchasing my silhouette, and I relly have no idea how I got by so long without it.

Okay, sorry about that gushing. Back to pumpkin carving.

I received an e-mail from Silhouette letting me know that all Halloween shapes were on sale for $.75! I browsed the online store until I found a shape that spoke to me. I chose the Owl Jack O Lantern -owl_jack_o_lantern_C20091027181311_19210 10/28/2009 and downloaded it into Silhouette Studio. I knew that I wanted to carve a big pumpkin, so I sized it as large as I could. I ended up going with freezer paper as my material because I knew it would lay the best on a bumpy pumpkin.

Here is what my pumpkin looked like after I got through carving it:

For the chest feathers, I decided not to carve all the way through, but scraped away the flesh from the pumpkin so that they would have a nice glow when a candle was placed inside.

And now for the pumpkin lit-up:

I realized that once I could see it lit, that my stencil was a wee bit crooked, but I think it turned out amazing!

A Harry Potter Onesie!

I have been a bad, bad blogger and haven't been around much. We have had a lot going on in our lives lately and I've been traveling a lot for work and we had to work in a vacation in there so my crafting time lately has been limited.

I was thankfully able to work in some craft time over the weekend, and made an adorable Harry Potter related onesie for a friend of mine who will be an aunt very soon. I decided to make a Gryffindor House-ish shirt and came up with this using my Silhouette SD and freezer paper. Man, so I LOVE freezer paper stencils!

I apologize for the poor photo. I couldn't find my camera and only had my phone handy.

To make this onesie, I downloaded a couple images from the Silhouette Store. For the tie, I used this neck_ties_C00066_22902  and for the crest I used one from this shield_set_C00982_20387. The Gryffindor "G" is just Helvetica font.

I decided to fancy this up a bit by using Tulip Pearl Scarlet Red fabric paint, which has a little bit of shimmer to it, which I think added a nice pop to this lovely onesie. I had to add a tiny drop of black to get it to the proper Gryffindor shade. For the gold, I used Tulip Sunshine Yellow fabric paint.

I really like how this one turned out and I see myself making Hufflepuff, Ravenclaw, and even Slytherin shirts in my future.

My First Freezer Paper Stencil Tutorial

I was finally able to sit down with my Silhouette and start to figure it out. I decided that an easy starter project would be a t-shirt made with a freezer paper stencil. I saw this great onsie on Pinterest and knew I would want to make this for friends who love all things Potter.

To get started, I downloaded a Harry Potter font on dafont.com, which is one of my favorite sites for free fonts. 

I then measured my shirt to determine how big I should make my stencil.

I opened up Silhouette Studio and created a new project. Since the shirt measured about 10 inches across,  I decided the stencil should be 7 inches wide.

 

I then cut my freezer paper just a bit larger then my stencil using a paper trimmer and placed the paper, shiny side down on the cutting mat. I tried to use the sticky mat and had horrible results when trying to peel the stencil off, so I switched to the less sticky mat.

I used the settings for vellum, and told my Silhouette to cut.

When it finishes, just peel the stencil off the mat. You'll have something that looks like this left on your mat

You will need to peel out the center of the remaining letters and use those to fill in the stencil on your shirt.

Before applying your stencil to your shirt, make sure that you have pre-washed and dried it in case it decides to shrink a bit. You should also iron your shirt before applying your stencil.

To apply your stencil, simply place it on your shirt and iron it in place using medium-high heat, until you are sure it is nice and secure. Then add the centers of your letters and iron in place. Make sure you are not using a steam setting on your iron, as this will mess up your stencil.

You are now ready to paint! I used Tulip permanent fabric paint, which can be found in a wide variety of colors and finishes at any craft store. I got mine during a sale a JoAnn's for around $1 for a small container. I then used a foam brush to evenly apply the paint.

To get the look I wanted, I applied 2 coats of paint and waited a couple hours for each coat to dry completely before applying the next. I also placed a piece of cardboard inside the shirt in case the pain decided to bleed through the fabric.

Once both coats were dry, I simply peeled off the freezer paper to reveal the finished product.

The instructions on the paint suggested that you heat-set the paint, so I took a dish towel that I folded in half, and placed that on top of the shirt and ironed it using high heat for about 30 seconds.

All in all, this was an easy project, and I'm sure I'll be making plenty more of these in the future.